Explorer Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 11 Results
  1. 1st Generation Explorers | 1991-1994
    Hello, I have a 91 Ford Explorer 4.0. Vehicle sat for a year and leaked water down to the computer. Replaced computer and then ran good. However, it only makes it about 15 miles then CEL comes on, loses power, idle ramps up to about 2 thousand RPM on side of road and dies. It’s done it every...
  2. 2nd Generation Explorers | 1995-2001
    I posted this on another forum...hopefully you'll be able to help me :) I have a 2001 XLT with a 4.0 V6 SOHC and it has developed a pretty bad vibration when accelerating. I bought the truck in December of 2016 and the only issues with it were the thermostat being stuck open and the 4X4 lights...
  3. 2nd Generation Explorers | 1995-2001
    Im trying to figure out some cheap mods I can do to my 98 ford explorer anyone have any good suggestions
  4. 3rd Generation Explorers | 2002-2005
    I had an AWD 5.0L V8 Ediie Bauer Explorer but unfortunately flipped it coming home for Thanksgiving this year on a back road. I needed a vehicle and I found this 2003 Eddie Bauer trim Explorer at a great price. Runs amazing. Video of me on a frozen parking lot...
  5. New Member Introductions
    hey guys, new to the explorer world, just picked up one last weekend. hopefully this site will be useful, but anyways here is what i got 1996 Ford Explorer XLT "control trac" 4WD system 4.0L V6 automatic w/OD power (mirrors, windows, locks, seats) "electric red" with tan interior (cloth) very...
  6. 3rd Generation Explorers | 2002-2005
    My 2003 Explorer has been acting a bit weird lately. I have been getting about 10.9 MPG in the city, which is terrible. Also when accelerating form a stand still, it seems to loose power and responsiveness. It also does not downshift when i need it to which is especially annoying when i need to...
  7. 3rd Generation Explorers | 2002-2005
    I recently took my Explorer to a shop and i found that the Ball joints were completely worn out. The sway bar was also not connected properly and had no bushings to hold it in place. The mechanic told me that the sway bar was a quick fix, but the ball joint wasn't. He told me i have to replace...
  8. Site Help and Suggestions
    You can follow us on Twitter: @ExplorerTalk You can follow us on Facebook: ExplorerTalk Add us and spread the word!:2thumbup:
1-8 of 11 Results
Top