Explorer Talk banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi everyone,

We came into a conclusion that my ABS module is faulty. Now the big question is, I am looking for an ABS module. My car is 2007 RSC ADV-Trac. My ABS module number is 7A24_2C219_CG. However, I was able to find an ABS Module from a 2006 explorer with the number 6L24-2C219-CH and it's written RSC/IVD on it. will I be able to fit the 2006 module on my 2007 car ? will I be able to program it and make work fine?

I would appreciate any help or input given on this matter.
Thanks!
 

·
Registered
Joined
·
8 Posts
Hi everyone,

We came into a conclusion that my ABS module is faulty. Now the big question is, I am looking for an ABS module. My car is 2007 RSC ADV-Trac. My ABS module number is 7A24_2C219_CG. However, I was able to find an ABS Module from a 2006 explorer with the number 6L24-2C219-CH and it's written RSC/IVD on it. will I be able to fit the 2006 module on my 2007 car ? will I be able to program it and make work fine?

I would appreciate any help or input given on this matter.
Thanks!
When it comes to braking and airbags, I would not cut corners. The liability is too high. I would not trust anyones reply to this question. Check on line at a Ford dealer website (I like AutoNation MN - good service, great prices) and buy the part new from them.

If you insist on buying used, I would only accept the part out of a 2007 Explorer that matches yours.

Finally,before you proceed, you need to determine why the module failed. Perhaps replies from others might give you ideas on how to diagnose this.

Pat
 
1 - 2 of 2 Posts
Top